School Project Models

Product Details:

An automatic solar irrigation system operates independently without an Arduino by utilizing alternative control circuitry. A soil moisture sensor acts as the trigger, sending a signal when dryness exceeds a set threshold. This signal activates a transistor which functions as the system's brain. The control circuit then switches on a submersible water pump, powered directly by a solar panel or a battery charged by it. Once the sensor detects sufficient moisture, it sends another signal to break the circuit and turn the pump off. This efficient setup conserves both water and energy by harnessing renewable solar power. It provides a cost-effective, low-maintenance solution for gardens and farms, ensuring plants receive water only when necessary.

what you have to arrange - 1. 24/18 inch any hardsheet 2. 9v battery - 2 nos 3. Glue gun and stick

Additional Information:

• Item Code: P-003
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: As per vdeo

Product Details:

This project is designed with principle of feedback control and wireless communication.  It is assumed that there is one bar magnet installed in the train and two magnetic receiver/sensors sections installed by the side of the railway track. This receives the magnetic signal and converts it into the TTL pulse and feed into the micro controller. The receivers are receiving the signals at a particular sequence. And the processor takes the decision as follows.

1)      In the normal condition the gate remain opened, and green light near the gate is lighted. When the train approach the gate, the 1^st sensor receives the signal, which in turn feed to the controller and the controller light the Red LED and starts alarming. At the same time the gate is started closing by driving a D.C. motor in forward direction.

2)               The gate is connected with a feedback sensor, which senses the closer of the level crossing gate. As soon as the gate is closed the feedback signal is received by the controller and stops the D.C. Motor.

3)   When the train crosses the level crossing area, the 2^nd sensor detects the signal and feedback a pulse to the controller.  After receiving the signal, the controller again light up the green LED and opens the level crossing gate.

Additional Information:

• Item Code: P115
• Production Capacity: 10
• Delivery Time: 05Days
• Packaging Details: Background paper, circuit, Adapter/battery, Trees, House, Fixing pins, Cars, toy train

Product Details:

The four important means of transport are road transport, rail transport, water transport, and air transport. Road transport is the most commonly used means of transport in most parts of the world.

Additional Information:

• Item Code: P117
• Production Capacity: 10
• Delivery Time: 05days
• Packaging Details: Background paper, Trees, House, Fixing pins, Cars etc

Product Details:

Award Winning Accident Prevention Road Safety Model With Speed Breaker Power Generator 1. Power generation using speed breaker 2. Alert in U-turns 3. Accidental information system with GPS value 4. Smart street light 

Additional Information:

• Item Code: P161
• Production Capacity: 10
• Delivery Time: 04 days
• Packaging Details: Complete circuit, background material, fixing pins, power adaptor, houses and trees.

Product Details:

The Futute Highway project integrates vertical-axis wind turbines into lamp posts, harnessing the wind from passing vehicles to power automatic, energy-efficient street lights. Embedded within the road surface are wireless EV charging modules that create dynamic charging lanes. As electric vehicles drive over these lanes, they receive a continuous charge, significantly extending their range and enabling near-uninterrupted travel. The entire smart infrastructure is managed by a central AI that optimizes energy distribution between the turbines, street lights, and the charging grid. This creates a self-sustaining eco-cycle where the motion of cars generates the power that lights the road and fuels future journeys. It's a comprehensive solution aimed at eliminating range anxiety and paving the way for sustainable, long-distance electric mobility. Buy link given in youtube description. 

Additional Information:

• Item Code: P150
• Production Capacity: 10
• Delivery Time: 04 days
• Packaging Details: Houses, trees, complete circuit, flex vehicles and etc. (No battery)

Product Details:

Our school project demonstrates hydro power by channeling water from an elevated container down a plastic tube. This flowing water spins a plastic turbine connected to a small motor, which acts as a generator. The generator converts the mechanical energy of the spinning turbine into electrical energy. This electricity is powerful enough to light a small LED bulb brightly. We built the turbine housing and water channel from recycled bottles and cardboard. This model effectively shows how moving water can be transformed into usable power. It highlights the renewable nature of hydropower, as the water can be recycled and used repeatedly. This hands-on experiment perfectly illustrates the clean energy potential of flowing water.

Additional Information:

• Item Code: P9870
• Production Capacity: 10
• Delivery Time: 5
• Packaging Details: Complete circuit using Led,background paper,house,car,artificial trees, plastic container, Water tank, Project descrption paper in whatsapp.

Product Details:

Thermal power is the process of generating electricity by converting heat into electricity. Thermal power stations use heat energy to boil water in a pressure vessel to create high-pressure steam, which then drives a turbine connected to an electrical generator. The primary source of heat can come from burning fossil fuels like coal, oil, and natural gas, or from nuclear fission. EKT Interactive What is Thermal Power? Thermal power generation is a central part of supplying power because it can respond to demand fluctuations as output increases. The thermal power input to a boiler is measured in megawatts thermal (MWt), while the output, which usually supplies electric power to the grid, is measured in megawatts electric (MWe). The MWt value is always larger than the MWe value because not all of the input heat can be converted entirely into electricity. Generative AI is experimental.

Additional Information:

• Item Code: P9087
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, Complete circuit

Product Details:

A biogas plant is a facility that provides oxygen-free conditions where anaerobic digestion can occur. Simply put, it’s an artificial system where you can turn waste into sustainable energy and fertilizers, with positive effects on the environment.
A biogas plant has three major components that make the biogas production process possible:
-a reception area-a digester (or fermentation tank)-a gas holder.

Additional Information:

• Item Code: P9989
• Production Capacity: 10
• Delivery Time: 04 days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, Complete circuit

Product Details:

A hydropower plant, also known as a hydroelectric power plant, is a renewable energy facility that uses the kinetic energy of flowing water to generate electricity. Our school project demonstrates hydro power by channeling water from an elevated container down a plastic tube. This flowing water spins a plastic turbine connected to a small motor, which acts as a generator. The generator converts the mechanical energy of the spinning turbine into electrical energy. This electricity is powerful enough to light a small LED bulb brightly. We built the turbine housing and water channel from recycled bottles and cardboard. This model effectively shows how moving water can be transformed into usable power. It highlights the renewable nature of hydropower, as the water can be recycled and used repeatedly. This hands-on experiment perfectly illustrates the clean energy potential of flowing water.

Additional Information:

• Item Code: P9878
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Background paper, circuit, trees, houses, pump

Product Details:

This innovative green building school project is a comprehensive model of sustainability. It integrates solar panels and a small wind turbine to generate clean, renewable energy, powering the entire structure. Large, transparent windows are strategically placed to maximize natural daylight, reducing the need for artificial lighting. The design features an extensive green roof and lush balcony gardens, which provide insulation, reduce the urban heat island effect, and create natural habitats. A sophisticated rainwater harvesting system collects runoff from the roof, storing it for irrigation and non-potable uses. This holistic approach combines energy efficiency, water conservation, and biophilic design to create an educational and environmentally responsible building.

Additional Information:

• Item Code: P9894
• Production Capacity: 10
• Delivery Time: 05days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, Complete circuit

Product Details:

The solar irrigation project leverages renewable solar energy to power agricultural irrigation systems. It consists of solar panels that capture sunlight and convert it into electricity, which is stored in a battery for later use. This stored energy powers an electric pump, which draws water from a nearby source and delivers it to crops via a water tank. The water tank stores the irrigated water, allowing for efficient distribution as needed. This eco-friendly system reduces dependence on conventional power sources and ensures sustainable water management for agriculture, even during off-sunlight hours. It contributes to reducing costs and environmental impact, offering farmers a reliable, cost-effective solution for irrigation. Contact for online buy - nine seven seven six four one four four two five

Additional Information:

• Item Code: P98701
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Water tank, background paper, solar panel, pump, irrigation trey, container

Product Details:

This working model of a sewage treatment plant begins with primary screening, where a small mesh filter removes large solid debris from the incoming wastewater. The water then flows into a coagulation tank where a coagulant is added, causing tiny particles to clump together. In the subsequent flocculation chamber, a gentle stirrer helps these clumps, or flocs, form larger, heavier masses. These settle out in the sedimentation tank, where a simple DC motor-powered arm skims floating oil and grease from the surface. The clearer water at the top is then pumped through a layered sand filter to trap any remaining fine particles. Finally, the treated water is collected in a storage tank, from where a small pump distributes it for safe reuse, demonstrating the complete cycle from waste to purified water.

Additional Information:

• Item Code: PP4565
• Production Capacity: 10
• Delivery Time: 5 days
• Packaging Details: Background paper, circuit, container, houses, pipes, straw pipes, stick, water tank, etc (Without battery and base)

Product Details:

This smart toilet system uses two switches to detect user entry and exit. Upon entry, the "Busy" LED activates while the "Free" LED turns off. The system prevents immediate exit after use; the user must first flush. A water level sensor checks the tank, and flushing is only permitted if water is available, indicated by a specific LED. If the tank is empty, a "No Water" LED illuminates and the flush is bypassed, allowing normal exit. After a successful flush, a "Flush Alert" LED paired with a buzzer activates to confirm operation. Once flushing is complete, the system allows the user to exit, deactivates the "Busy" LED, and reactivates the "Free" LED, returning the system to its idle state.
What you have to arrange - 1. 24/18 inch any hardsheet 2. Glue gun and stick 3. 9v battery - 4nos (Good quality)

Additional Information:

• Item Code: PP7656
• Production Capacity: 05
• Delivery Time: 05 Days
• Packaging Details: Complete circuit, trees, houses, background paper, magnet

Product Details:

Abstract - Operation Sindoor was a tri-service Indian military operation launched on May 7-8, 2025, to retaliate against a Pakistan-sponsored terrorist attack in Pahalgam, which killed 26 people. The operation involved precision strikes on nine terrorist infrastructure sites in Pakistan and Pakistan-occupied Kashmir, aiming to dismantle terrorist networks and deter future cross-border attacks. It marked a significant shift in India's military doctrine, from reactive restraint to assertive deterrence, utilizing advanced technology and integrated joint forces. Operation Sindoor is a conceptual defense strategy modeled to demonstrate the precision and technological advancement of modern air-to-ground strikes. The project aims to showcase how automated systems can neutralize specific targets with minimal collateral damage using electromagnetic propulsion. By integrating an Arduino-controlled circuit, the model simulates a real-time engagement where a jet releases a missile triggered by a start switch.

Additional Information:

• Item Code: PPP76
• Production Capacity: 05
• Delivery Time: 05 Days
• Packaging Details: As per video

Product Details:

This smart PREPAID toilet system operates by requiring a user to insert a coin, which is detected by a switch sensor, to unlock the door. Upon entry, the system activates, and the user cannot exit until they flush the toilet, provided there is sufficient water in the tank as determined by a water level sensor. A hall effect sensor attached to the water tap confirms the flush action. If water is unavailable, the door unlocks normally for safety. During the exit process, if a flush is required but not performed, a red LED and a buzzer activate to alert the user. An LCD screen continuously displays the system status, including coin acceptance, water level, and flush confirmation. The entire process is managed and monitored by an Arduino, ensuring a automated, hygienic, and user-controlled experience.

What you have to arrange - 1. 24/18 inch any hardsheet 2. Glue gun and stick 3. 5 rupees coin - 1

Additional Information:

• Item Code: PP8881
• Production Capacity: 05
• Delivery Time: 05 Days
• Packaging Details: As per video

Product Details:

Voice Controlled Wireless Home Automation Based on internet/ Bluetooth/ wi-fi is a project that is integrated system with mobile phone (application) to give the facility to the elderly and the disable people, so that they can easily control home utilities fully Based on their phone through voice command.

Additional Information:

• Item Code: P109
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: circuit, Adapter/battery, Report PPT Code

Product Details:

This weather monitoring system acts as a localized meteorological station, utilizing an Arduino microcontroller to process environmental data in real-time. The DHT11 sensor captures ambient temperature and humidity levels, while a Rain Sensor detects the presence and intensity of precipitation through a voltage comparator. To measure wind speed, a custom-built anemometer consisting of a propeller attached to a DC motor (dynamo) generates a small voltage proportional to the wind's velocity, which the Arduino interprets as an analog signal. All gathered data—temperature, humidity, rain status, and wind speed—is displayed instantly on a 16x2 LCD screen for easy monitoring. The system provides a low-cost, efficient way to track weather patterns and can be expanded for IoT data logging. Real-Time Data: Monitor temperature, humidity, and wind speed on a crystal-clear LCD display. Custom Anemometer: Learn how to use a simple DC motor and propeller to measure wind velocity. Rain Detection: Integrated sensor to alert you the moment precipitation begins. Arduino Powered: A perfect DIY project for students and electronics hobbyists interested in meteorology. Sustainable Tech: Use this model for school science fairs or home automation setups.

What you have to arrange - 1. 24/18 inch any hardsheet 2. Glue gun and sticks 3. 3.7v Battery

Additional Information:

• Item Code: PJ65T
• Production Capacity: 10
• Delivery Time: 05 Days
• Packaging Details: As per video

Product Details:

PROJECTRONICS #schoolproject #greenbuildings #smarthome what you have to arrange - 1. 24/18 inch any hardsheet 2. Glue gun and stick Abstarct - The rapid advancement of urban living has necessitated the integration of sustainable technologies within residential spaces to mitigate environmental impact and optimize resource consumption. This project presents a comprehensive Smart Home Model that harmonizes renewable energy harvesting with automated indoor climate and lighting management. By leveraging a hybrid power system comprising solar, wind, and hydroelectric energy, the model ensures a resilient and eco-friendly power supply, with real-time status monitored via an Arduino-integrated LCD. Beyond energy generation, the home incorporates "Green Building" concepts, such as a rainwater harvesting system powered by a DC pump to promote water conservation. Indoor efficiency is achieved through intelligent automation: a footstep-triggered up/down counter manages room lighting based on occupancy, while an LM35 sensor regulates fan speeds according to ambient temperature. This holistic approach not only demonstrates the feasibility of self-sustaining living environments but also highlights the role of embedded systems in reducing the carbon footprint of modern households. Through the synergy of sensors, microcontrollers, and renewable sources, this model serves as a functional prototype for future smart cities, emphasizing autonomy, efficiency, and ecological responsibility. We also deals with - Inhouse project training in school and colleges - Online class/help for invidual projects - 1000s of readymade projects - Customized circuits on request - Both electronics and art n craft materila, retail and wholeselling sale sustainable smart home,green building project,eco-friendly architecture,smart home automation,renewable energy,sustainable living,school science project,green technology,energy efficiency,net zero home,solar energy,smart building design,environmental sustainability,LEED certification,smart sensors,passive house design,sustainable construction,recycled building materials,home automation for sustainability,eco-smart home project,smart home using arduino

Additional Information:

• Item Code: PP8810
• Production Capacity: 05
• Delivery Time: 5-7 Days
• Packaging Details: As per video - Everything

Product Details:

The present scenario of technology, research and development primarily focused on the defense activity. The Anti Tank mine detector is a robotic instrument which can be used as a mine detector to protect the Tank. This is very much useful and advantageous to protect the tanks moving on the war field. The ANTI-TANK MINE DETECTOR is an automated robotic vehicle which moves on the earth surface and scans the area on which it moves. This project is designed with an intension to design a pilot robot which can guide the tank fleet. The Pilot robot is designed to find out a safe path for the tanks. This robot is known as Anti Tank Mine Detector.

Additional Information:

• Item Code: P133
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: circuit,motor, adaptor

Product Details:

This model includes strategies to lower traffic speeds and volume in order to improve safety for pedestrians, bicyclists, and all-terrain vehicle (ATV) users who share the road with cars and other motorized vehicles.

Additional Information:

• Item Code: P8876
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, traffic post, symbols...

Product Details:

This innovative medical waste management project implements a sustainable circular economy model by repurposing two key waste streams. Non-hazardous plastic waste, such as discarded IV bottles and packaging, is sterilized, shredded, and used as a partial replacement for bitumen in constructing durable "plastic roads." Concurrently, recovered metal items like surgical instruments and equipment are sterilized through autoclaving or other methods, melted down, and recycled into new metal products. This dual approach significantly reduces the volume of waste sent to landfills, minimizes environmental pollution, and conserves natural resources. It transforms a costly disposal problem into valuable materials for infrastructure and manufacturing, promoting environmental stewardship and creating a safer, more sustainable waste management system for the healthcare sector.what you have to arrange -
1. 24/18 inch and 24/12 inch any hardsheet 2. 9v battery - 2 nos 3. Glue gun and stick We also deals with - Inhouse project training in school and colleges - Online class/help for invidual projects - 1000s of readymade projects - Customized circuits on request - Both electronics and art n craft materila, retail and wholeselling sale

Additional Information:

• Item Code: P9998
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, Complete circuit

Product Details:

Our school project demonstrates hydro power by channeling water from an elevated container down a plastic tube. This flowing water spins a plastic turbine connected to a small motor, which acts as a generator. The generator converts the mechanical energy of the spinning turbine into electrical energy. This electricity is powerful enough to light a small LED bulb brightly. We built the turbine housing and water channel from recycled bottles and cardboard. This model effectively shows how moving water can be transformed into usable power. It highlights the renewable nature of hydropower, as the water can be recycled and used repeatedly. This hands-on experiment perfectly illustrates the clean energy potential of flowing water.

Additional Information:

• Item Code: PP8897
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: As per video (Except - 9v battery, 24x18inch hardsheet, 8 bottle caps)

Product Details:

This integrated disaster management system utilizes multiple sensors with an Arduino for early warnings. A piezoelectric sensor detects seismic vibrations from earthquakes, triggering an alert. For floods, a water level sensor monitors rising levels and activates alarms upon exceeding thresholds. Wind speed during cyclones is measured by a dynamo-based anemometer, signaling dangerous velocities. A thermistor tracks ambient temperature, issuing heat wave warnings during critical highs. The Arduino processes all inputs continuously, activating respective LED indicators and a buzzer for immediate alerts. This compact model effectively demonstrates real-time environmental monitoring for proactive disaster response.

Additional Information:

• Item Code: PP9098
• Production Capacity: 10
• Delivery Time: 05 Days
• Packaging Details: Background paper, Circuit, trees, house, dc gear motor, cotton, paper, cars (No battery, gluegun and stick and base)

Product Details:

This Arduino-based system monitors forests using sensors. Its sound sensor identifies the specific frequencies of chainsaws (cutting) or gunshots (poaching). A temperature sensor detects abnormal heat spikes indicating fire. When triggered, the onboard LED illuminates as a local signal. Simultaneously, the HC-05 Bluetooth module relays an alert to a nearby smartphone. A dedicated Arduino app on the phone receives this data. The app then forwards an automated SMS with the alert type and location. This provides rangers with immediate, actionable intelligence for a rapid response.

Additional Information:

• Item Code: PP99890
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Circuit, background paper, house, trees (No battery, base and gluegun)

Product Details:

The effects of global warming are severe and far-reaching. Rising global temperatures are causing polar ice caps and glaciers to melt, contributing to sea-level rise and threatening coastal communities. This warming also intensifies extreme weather events, including more frequent and powerful hurricanes, prolonged droughts, and devastating wildfires. Ocean acidification, caused by absorbed CO₂, is severely damaging marine ecosystems like coral reefs. Changes in climate patterns are disrupting agriculture, leading to food and water insecurity. Biodiversity loss is accelerating as species struggle to adapt to rapidly shifting habitats. Additionally, human health is at risk from heatwaves, the spread of infectious diseases, and worsened air quality. These interconnected impacts pose a profound threat to global economic stability and societal well-being. what you have to arrange - 1. 24/18 inch and 24/12 inch any hardsheet 2. 9v battery - 2 nos (Good quality) 3. Glue gun and stick

Additional Information:

• Item Code: PP0902
• Production Capacity: 5
• Delivery Time: 05 Days
• Packaging Details: As per video (No battery and base)

Product Details:

Abstarct - For a realistic stadium model, construct the base structure from sturdy sunboard, carefully cutting and layering it to form the elevated bowl shape, tiers, and the main playing field. Use detailed printouts for all surfaces, applying high-resolution images of grass, track lanes, seating patterns, sponsor logos, and crowd scenes to the sunboard forms for a lifelike appearance. To complete the diorama, strategically install miniature LED flood lights on tall, thin poles around the stadium's rim and atop the main grandstand roof; wiring these to a small, hidden battery pack will dramatically illuminate the entire scene, creating a vibrant night-match atmosphere and highlighting the intricate details of your build. What you have to arrange - 1. 18x18 inch any hardsheet 2. Glue gun and sticks We deals with - Inhouse project training in school and colleges - Online class/help for invidual projects - 1000s of readymade projects - Customized circuits on request - Both electronics and art n craft materila, retail and wholeselling sale

Additional Information:

• Item Code: PP9917
• Production Capacity: 05
• Delivery Time: 05 Days
• Packaging Details: As per video

Product Details:

Established in the year 2009, we, “Projectronics” are a reputed organization involved in Manufacturing and Trading a wide array of Rain Water Harvesting Model, Earthquake Alarming System Model, School Project Models, and Engineering Projects Models etc. Offered products are designed by our skilled professionals using quality assured material and sophisticated technology in sync with the set industry standards.

Product Details:

IOT and Arduino based Greenhouse Environment Monitoring and controlling project use four sensors to detect the Temperature, Light, Humidity and Soil moisture in the Greenhouse. ... Light Sensor is used to detect the amount of sunlight inside the greenhouse. Reading from the sensor is sent to the microcontroller.

Additional Information:

• Item Code: P114
• Production Capacity: 10
• Delivery Time: 05days
• Packaging Details: Background paper, circuit, Adapter/battery, Trees, House, Fixing pins, Cars

Product Details:

This Arduino-based smart toilet project aims to improve public toilet hygiene. A water level sensor monitors the tank, and an electromagnetic lock acts as a secondary security measure. A flush sensor detects if the toilet has been flushed. If a flush is not detected, the secondary lock activates, and a buzzer sounds to alert the user until the flush is activated. This ensures the toilet is properly flushed after each use. The secondary lock system is deactivated when the water tank is empty, preventing the system from locking the toilet when it cannot be flushed. This project promotes cleanliness and proper sanitation in public spaces.

Additional Information:

• Item Code: P162
• Production Capacity: 10
• Delivery Time: 04 days
• Packaging Details: Complete circuit, flex, fixing pins, houses, trees.

Product Details:

We live in the modern age. The internet is at the reach of our hands and smart devices are almost in every pocket. The technology we have, can help us to: save more energy, cut costs and keep the Earth green at the same time, save our time that we can spend somewhere else, improve our living comfort in order for us to get more rest an feel better overall to easily complete everyday tasks, increase safety and security of us, our children and our homes.

Features

1.      Automatic street light

2.    Automatic main gate controller

3.    Fire alarm

4.    Water over flow alarm

5.     Automatic bathroom light control

6.    Automatic calling bell

7.     Theft alarm
LPG alarm

Smart cloth dryer

Additional Information:

• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Houses, trees, 12v adaptor,flex, Complete circuit

Product Details:

A pioneering project explores the conversion of agricultural waste, specifically sugarcane bagasse and rice straw, into renewable energy. First, these abundant lignocellulosic materials undergo pre-treatment to break down their tough structure. Enzymes are then added to hydrolyze the cellulose, converting it into fermentable sugars like glucose. This sugar-rich broth is fermented using specialized yeast, which metabolizes the sugars to produce ethanol. The resulting ethanol is then purified and concentrated through a distillation process to create a high-purity biofuel. This bio-ethanol is subsequently utilized as a clean-burning fuel in a modified generator or turbine. The combustion of ethanol within the engine generates mechanical energy, which is ultimately converted into electrical power by an alternator. This sustainable cycle effectively transforms field residue into valuable electricity, reducing waste and fossil fuel dependence.

Additional Information:

• Item Code: PP879
• Production Capacity: 10
• Delivery Time: 06 days

Product Details:

PROJECTRONICS #electricalengineeringproject #arduinoprojects #btechprojects what you have to arrange - 1. Glue gun and stick 2. 24x18 inch ply or any hardsheet Base 3. 3x100watt Bulb Abstarct - The IoT-Based Star-Delta Starter is an innovative engineering solution designed to address the challenges of starting high-power industrial induction motors while integrating modern remote-access capabilities. Traditional motors draw a massive starting current, often 5 to 7 times their rated current, which can cause significant voltage drops in the power grid and mechanical stress on the motor windings. This project utilizes a Star-Delta starting mechanism to mitigate these issues by initially connecting the motor in a 'Star' configuration to reduce the starting voltage and current, before transitioning to a 'Delta' configuration for full-load operation. By incorporating the NodeMCU ESP8266 microcontroller, the system moves beyond traditional manual or semi-automatic starters into the realm of the Internet of Things (IoT). This allows operators to control and monitor the motor status from anywhere in the world via the Adafruit IO cloud platform. The integration of an I2C LCD provides real-time local feedback, while physical push buttons ensure that manual control remains available as a fail-safe. This hybrid approach—combining industrial power logic with wireless connectivity—enhances operational efficiency, reduces the need for physical presence near heavy machinery, and contributes to the longevity of the motor by ensuring a smooth, timed transition between phases. As industries move toward Automation 4.0, such smart motor controllers become essential for reducing energy waste and improving safety through digital oversight. This project serves as a scalable model for smart industrial applications, demonstrating how low-cost microcontrollers can modernize heavy electrical infrastructure. Component Details NodeMCU ESP8266: The brain of the project, providing Wi-Fi connectivity and GPIO control. I2C LCD 16x2: Displays real-time status, countdowns, and connection information. 2-Channel Relay Module (5V): Acts as the switch for the Main and Delta contactor coils (Active Low). Push-to-ON Buttons (Red & Green): Provided for local manual start and stop functionality. I2C Adapter (PCF8574): Simplifies LCD wiring by using only two data pins (SDA/SCL). 5V DC Power Adapter: Supplies regulated power to the NodeMCU and relay modules. Connecting Wires (Jumper Wires): Used for breadboard or PCB interconnections. Breadboard or Zero PCB: For mounting and organizing the electronic components. We also deals with - Inhouse project training in school and colleges - Online class/help for invidual projects - 1000s of readymade projects - Customized circuits on request - Both electronics and art n craft materila, retail and wholeselling sale iot star delta starter, nodemcu star delta project, esp8266 motor control, adafruit io motor control, smart motor starter, arduino star delta starter, industrial iot projects, voice controlled motor starter, wifi motor starter, star delta starter with lcd, i2c lcd nodemcu, iot engineering projects, home automation motor control, nodemcu relay module, smart agriculture motor, bjb autonomous college project, star delta starter wiring, motor protection circuit, remote motor control, nodemcu programming, star delta timer circuit, automatic motor starter, diy iot starter, electrical engineering project, electronics project for students

Additional Information:

• Item Code: PP9912
• Production Capacity: 05
• Delivery Time: 07 Days
• Packaging Details: As per video

Product Details:

This project contains a wheelchair for physically and visually disabled people. In this way we have obtained a wheelchair which can be driven with using key commands and with the possibility of control of home appliances with a wireless link. The wheel chair unit accepts input from the keyboard. Each key of the keyboard is assigned with wheel control of the chair and home appliances control. The receiver section consists of a RF receiver and different drivers for different motors and lights.

Additional Information:

• Item Code: PP778
• Production Capacity: 10
• Delivery Time: 06days
• Packaging Details: As per video

Product Details:

The system proposed in this paper is an advanced solution for monitoring the weather conditions at a particular place and make the information visible anywhere in the world. The technology behind this is Internet of Things (IoT), which is an advanced and efficient solution for connecting the things to the internet and to connect the entire world of things in a network. Here things might be whatever like electronic gadgets, sensors and automotive electronic equipment. The system deals with monitoring and controlling the environmental conditions like temperature, relative humidity and CO level with sensors and sends the information to the web page and then plot the sensor data as graphical statistics. The data updated from the implemented system can be accessible in the internet from anywhere in the world.

Additional Information:

• Item Code: P131
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Total circuit, adaptor

Product Details:

This device is to be turned on in advance by a woman in case she is walking on a lonely road or some dark alley or any remote area. Once she feels danger, she can press an emergency key and the system now injects chloroform with a high speed nozzle to the attacker and also sends lat/long value of that location to the authorized personnel number through SMS message as a security measure and also sounds a buzzer continuously so that nearby people may realize the situation. This device will prove to be very useful in saving lives as well as preventing atrocities against women. The device uses GPS sensor along with a Bluetooth mdule, leds and microcontroller based circuit to achieve this system.

Note – Since this is a low cost prototype module, here we are using a Bluetooth device to send location, practically there will be a gsm modem.

Apparatus required

Arduino Uno (Atmega328)

Buzzer

Crystal

Oscillator

Resistors Capacitors

Transistors

Cables and Connectors

Diodes PCB and Breadboards

DC pump

Nozzle

HC-05 Bluetooth module

LED

Transformer/Adapter

Push Buttons Switch

IC and IC Sockets

Gps module

Product Details:

The anti-sleep alarm for drivers is an innovative project utilizing an 8051 microcontroller, an eye blink sensor, a DC motor, and a buzzer to enhance road safety. The system continuously monitors the driver’s eye movements using the eye blink sensor, which detects prolonged eye closure—a potential indicator of drowsiness. If the sensor detects a lack of blinking beyond a predefined threshold, the 8051 microcontroller processes the data and triggers an alert mechanism. The buzzer produces a loud sound to wake the driver, and the DC motor can be used to create additional vibrations on the steering wheel for a more tactile alert. This real-time detection and alert system aims to prevent accidents caused by driver fatigue, ensuring safer journeys on the road.

Additional Information:

• Item Code: P98980
• Production Capacity: 05
• Delivery Time: 05 days
• Packaging Details: Complete circuit without battery

Product Details:

Abstract - A hydroponics working model can be effectively built using simple components like a small water pump, a battery for power, plastic bottles as plant containers, a tray to hold the system, and artificial trees to visually represent the plants. The core concept involves the pump, submerged in a water reservoir made from a large bottle, circulating a nutrient-rich water solution to the plant roots through a network of tubing. The battery powers this pump, creating a continuous flow that delivers essential oxygen and nutrients directly to the root zone without the use of soil. The plant containers, crafted from cut bottles, are held securely in holes cut into the tray, allowing the roots to dangle into the flowing nutrient solution below. This constant circulation prevents water stagnation and mimics advanced systems like NFT (Nutrient Film Technique). Artificial trees are primarily for demonstration, but one can also include fast-growing real plants like lettuce or herbs in a separate section for comparison. This model elegantly showcases the principles of soilless agriculture, water efficiency, and innovative farming technology.

Additional Information:

• Item Code: PP9009
• Production Capacity: 05
• Delivery Time: 05 days
• Packaging Details: As per video (No battery no base)

Product Details:

The main component in the circuit is Atmega328p arduino microcontroller. In this project 3×4 keypad is used to enter the password. The password which is entered is compared with the predefined password. If entered password is correct, then the corresponding electrical line is turned ON or OFF. In this project, a separate password is provided to each electrical line. Activation and deactivation of the line (circuit breaker) is indicated by the load (Light Bulbs).Components Required8051 Microcontroller (AT89C52)8051 Development Board8051 Programming Board (Programmer)4 x 4 Matrix Keypad4 – Channel Relay Module16 x 2 LCD Display10KΩ Potentiometer4 Loads (Light Bulbs)Power SupplyConnecting WiresIf 8051 Development Board is not used, then you need0592 MHz Crystal2 x 33pF Capacitor2 x 10KΩ Resistors (1/4 Watt)Push Button10µF Capacitor (Electrolytic)1KΩ x 8 Pull – up Resistor PackIf Relay Module is not used, then you need (components mentioned for one load)5V or 12V Relay1KΩ Resistor (1/4 Watt)BC547 NPN Transistor1N4007 PN Junction Diode

Additional Information:

• Item Code: PPJ880
• Production Capacity: 10
• Delivery Time: 5 to 7 Days
• Packaging Details: As per video

Product Details:

Item Code: PC-607What you have to arrange: Gluegun, plywood (12/18 inch), 9v batteryDelivery Time: 5daysPackaging Details: Complete circuit, rack pinion setup with motor, Battery not included

Additional Information:

• Item Code: P-607
• Production Capacity: 10
• Delivery Time: 5days

Product Details:

Solar drip irrigation systems use solar panels to power small pumps that deliver water directly to plant roots. This method can be beneficial for remote or off-grid locations where electricity access is limited. Solar drip irrigation systems can also be sustainable and reduce the need to rely on power grids.

Additional Information:

• Item Code: P9889
• Production Capacity: 10
• Delivery Time: 05 days
• Packaging Details: Background paper, Sheets for houses, Trees, Vehicles, Complete circuit, pump, Tank, containor